Supporto telefonico dal lunedì al venerdì: dalle 9:30 alle 14:30 e dalle 16:30 alle 19:30 Phone:  +34 876 26 14 93
English Castellano french portuguese Italian
4x4proyect corporate
4x4proyect design

  share on facebook
4x4 Proyect Design
4x4 Proyect Design  4PD11402S Sistema di sospensione conversione link 3-4

4x4 Proyect Design 4PD11402S Sistema di sospensione conversione link 3-4

Kit Posteriore Supporti Destra E Sinistra Per Jeep Wrangler Yj E Tj

4PD11402S | 4x4 Proyect Design

CONSEGNA IN : 24H/48H Disponibile. Spedizione immediata.


Spedizione :

Pronto per il resto delle destinazioni : Aggiungere il prodotto al carrello e consultare

* Se ci sono diversi prodotti nel carrello, il prezzo di spedizione si adatta il prodotto dal carrello.


IVA 21% inclusa

4x4 Proyect Design as develop a Heavy Duty suspension system to be able to adapt to the Jeep Wrangler Yj, Tj and all vehicles with 100 mm chassis height, for abuse on trial and rocks, and be sure driving on&offroad tracks at medium or high speed.

These two brackets have part number 4PD11402S belong to the Heavy Duty Long Arm suspension series of 4x4 Proyect Design, are designed for mount on front position right or left sides of our 4x4.

This bracket systems, i designed for swap your short control arms, to long arm system, this is really interesting if you are looking for on&off road performance and great travels on rocks and trial.

The most interestins and innovative features are the free desing of suspension, with these brackets you can desing one front a system Radius Arm, 3-link right, 3- link left, tri-link or 4-link with V geometry upper arms.

for this proposal the upper arms brackets are placed in vertical position, being able to create all these configurations.

4x4 Proyect Design recommend the use of mixed long arms, one face with high impact bushings, and Heavy duty high misalingment ball joint on the other face like 4PD045203.

These brackets are made of high quality steel with 6 mm thickness, welded using double pulsed arc system, to ensure a middle compromise between resistance and elasticity.

Arm brackets have 66.8mm wide with a 9/16 "drill hole, commonly used on Jeep and other brands suspension arms.

You can mount those brackets with M16 screws not supplied, or you can weld directly to your chassis, so only 2 screws will have sufficient strength, and can fit up to 4 x M16 screws. In addition they can be used in any chassis that has a height of 100 mm, in case that the height is something smaller always they can fit in the part superior with intermediate plates.

A great idea, easy to mount, cheap ready for your free suspension design.

4x4 Proyect Design, because your project deserves the best.
  • These brackets are made of high quality steel with 6mm thickness.
  • Compatible with 4x4 Proyect Design 2.5 Series heavy duty ball joint 4PD045201 and 4PD045203
  • Sand blasting to avoid surface stresses in welding.
  • Double pulsed arc welding with high penetration capacity, giving it greater resistance and flexibility.
  • Valid for 100mm maximum height chassis
  • Brackets wide of 66,8mm for Jeep ball joints or bushing.

MakeModelYear RangeEngine TypeTrim
JeepWrangler Yj1986 - 1996
JeepWrangler Tj-Lj1997 - 2006

Prodotti correlati

Trabaja con nosotros
Chi Siamo
Servizio e supporto
Avviso legale
Condizioni di vendita
Restituzioni e garanzie
Metodi di spedizione
Tempi di consegna / disponibilità
Lunedì al Venerdì: 9:30 - 14:30
16:30 - 19:30
Phone +34 699 938 332
Office +34 876 26 14 93 (gratis)
facebook Facebook
Instagram Instagram
Trasporto sicuro con:
DHL Nacex Seur
Paghi i tuoi acquisti con:
Visa Visa electron Master Card
ssl pago seguro

©2021, 4x4 Proyect Todos los derechos reservados.

We use own and third party cookies to improve our services, analyze traffic and personalize ads. You can change these settings and obtain more information here.