English Castellano french portuguese Italian
4x4proyect ACCESSORIES AND SPARE PARTS FOR YOUR 4X4
4x4proyect corporate
4x4proyect design

4x4 Proyect Design 4PD11402S 3-4 Link Conversion Suspension System

4x4 Proyect Design
-29%
4x4 Proyect Design 4PD11402S 3-4 Link Conversion Suspension System

Kit Of Rear Brackets Left And Right For Jeep Wrangler Yj And Tj

4PD11402S | 4x4 Proyect Design

Kit Of Rear Brackets Left And Right For Jeep Wrangler Yj And Tj

4PD11402S | 4x4 Proyect Design
In Stock

DELIVERY IN : 24H/48H In Stock. Ready for immediate dispatch.

Shipping in :

Different destinations : Chose and add your product

* If there are more products in the basket, the transport price will be adjusted to the products from the basket.

-29%
385€
275.00€
Taxes 21% incl.
Taxes 21% included
DESCRIPTION

4x4 Proyect Design as develop a Heavy Duty suspension system to be able to adapt to the Jeep Wrangler Yj, Tj and all vehicles with 100 mm chassis height, for abuse on trial and rocks, and be sure driving on&offroad tracks at medium or high speed.

These two brackets have part number 4PD11402S belong to the Heavy Duty Long Arm suspension series of 4x4 Proyect Design, are designed for mount on front position right or left sides of our 4x4.

This bracket systems, i designed for swap your short control arms, to long arm system, this is really interesting if you are looking for on&off road performance and great travels on rocks and trial.

The most interestins and innovative features are the free desing of suspension, with these brackets you can desing one front a system Radius Arm, 3-link right, 3- link left, tri-link or 4-link with V geometry upper arms.

for this proposal the upper arms brackets are placed in vertical position, being able to create all these configurations.

4x4 Proyect Design recommend the use of mixed long arms, one face with high impact bushings, and Heavy duty high misalingment ball joint on the other face like 4PD045203.

These brackets are made of high quality steel with 6 mm thickness, welded using double pulsed arc system, to ensure a middle compromise between resistance and elasticity.

Arm brackets have 66.8mm wide with a 9/16 "drill hole, commonly used on Jeep and other brands suspension arms.

You can mount those brackets with M16 screws not supplied, or you can weld directly to your chassis, so only 2 screws will have sufficient strength, and can fit up to 4 x M16 screws. In addition they can be used in any chassis that has a height of 100 mm, in case that the height is something smaller always they can fit in the part superior with intermediate plates.

A great idea, easy to mount, cheap ready for your free suspension design.

4x4 Proyect Design, because your project deserves the best.
REF: 4PD11402S
FEATURES
  • These brackets are made of high quality steel with 6mm thickness.
  • Compatible with 4x4 Proyect Design 2.5 Series heavy duty ball joint 4PD045201 and 4PD045203
  • Sand blasting to avoid surface stresses in welding.
  • Double pulsed arc welding with high penetration capacity, giving it greater resistance and flexibility.
  • Valid for 100mm maximum height chassis
  • Brackets wide of 66,8mm for Jeep ball joints or bushing.
MakeModelYear RangeEngine TypeTrim
 
JeepWrangler Yj1986 - 1996
JeepWrangler Tj-Lj1997 - 2006
We use own and third party cookies to improve our services, analyze traffic and personalize ads. You can change these settings and obtain more information here.